Shopping Cart
0 item(s) - $0.00
Installation AD

Support Tech Tips

Ohm's Law

Ohm's Law defines the relationships between (P) power, (E) voltage, (I)
current, and (R) resistance. One ohm is the resistance value through which
one volt will maintain a current of one ampere.

( I ) Current is what flows on a wire or conductor like water flowing down
a river. Current flows from negative to positive on the surface of a conductor.
Current is measured in (A) amperes or amps.

( E )Voltage is the difference in electrical potential between two points
in a circuit. It's the push or pressure behind current flow through a
circuit, and is measured in (V) volts.

( R )Resistance determines how much current will flow through a component.
Resistors are used to control voltage and current levels. A very high
resistance allows a small amount of current to flow. A very low resistance
allows a large amount of current to flow. Resistance is measured in ohms.

( P )Power is the amount of current times the voltage level at a given
point measured in wattage or watts.

PIONEER AVIC BYPASSES - UPDATED

This is a do it yourself List Pioneer bypasses.
Use these at your own risk.
If you see anything I'm missing or incorrect, please let me know.

emartfl@yahoo.com

https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0B8KmpFTIwfOzZjYzZjhlOTAtMzk4Ny00ZmExLTkwNmEtMDU4ZTE5NzI3MWZh&hl=en